diff --git a/2025_plus_models.md b/2025_plus_models.md index b4de80b..a35c99e 100644 --- a/2025_plus_models.md +++ b/2025_plus_models.md @@ -40,22 +40,25 @@ ### Setting up a new 2025 or later plus model with only unverified HDDs in DSM 7 1. Start telnet by entering `http://:5000/webman/start_telnet.cgi` into your browser's address bar. - Replace `` with the IP address of the Synology NAS. -2. Open a telnet client (powershell, PuTTY etc) on your computer and connect to the Synology with 'telnet `. +2. Open a telnet client (powershell, PuTTY, Terminal etc) on your computer and connect to the Synology by typing the following in the telent window then press enter: + ``` + telnet + ``` - Replace `` with the IP address of the Synology NAS. -3. Log into telnet with: +4. Log into telnet with: - `root` for the login - `101-0101` for the password -4. Execute the following command: (using a while loop in case DSM is running in a VM) +5. Execute the following command: (using a while loop in case DSM is running in a VM) ``` while true; do touch /tmp/installable_check_pass; sleep 1; done ``` -5. Refresh the web installation page and install DSM. -6. Then in the telnet window, or via SSH, execute the following command: +6. Refresh the web browser installation page and install DSM. +7. Then back in the telnet window, or via SSH, paste the following command and press enter: ``` /usr/syno/bin/synosetkeyvalue /etc.defaults/synoinfo.conf support_disk_compatibility no ``` -7. If Storage Manager is already open close then open it, or refresh the web page. If refreshing the page or restarting Storage Manager is not working, try restarting your Synology NAS. -8. You can now create your storage pool from Storage Manager. +8. If Storage Manager is already open close then open it, or refresh the web page. If refreshing the page or restarting Storage Manager is not working, try restarting your Synology NAS. +9. You can now create your storage pool from Storage Manager.