v3.6.109
- Added -I, --ihm option to update IronWolf Health Management to 2.5.1 to support recent model IronWolf and IronWolf Pro drives.
- For NAS with x86_64 CPUs only.
v3.5.102
- Changed to use a faster method of detecting if an expansion unit is connected, for models with the syno_slot_mapping command.
- Changed so XPE users using the hdddb addon don't need to reboot.
v3.5.100-RC
- Changed to support "--restore --ssd=restore" to restore write_mostly when restoring all other changes. Issue #340
- When using --restore you can also use --ssd=restore, -e or --email
v3.5.96
- Added option to set writemostly for your internal HDDs so DSM will normally read from your faster internal SSD(s).
- It can automatically set DSM to read from your internal SSDs.
- Or you can tell the script which internal drive(s) DSM should read from.
v3.5.94
- Updated to support newer drive db versions.
- Synology added size_gb in host v7 version 8051.
- Synology added barebone_installable_v2 in host v7 version 8054.
- Bug fix when restoring where memcheck service was only re-enabled on DVA models.
- Changed to add leading 0 to short vids reported by drive.
- Sets 2 vids in case DSM uses the short one (e.g. 0x05dc=brand and 0x5dc=brand).
v3.5.94
- Updated to support newer drive db versions.
- Synology added size_gb in host v7 version 8051.
- Synology added barebone_installable_v2 in host v7 version 8054.
Note: You may need to run syno_hdd_db without the -n or --noupdate option, then update the drive database from
"Storage Manager > HDD/SSD > Settings > Advanced > Update Now" then run syno_hdd_db with your preferred options.
v3.5.90
- Changed to enable creating storage pools/volumes on NVMe drives in a PCIe M.2 adaptor in DSM 7.2
- Previously only supported DSM 7.2.1
- Changed to enable creating storage pools/volumes on NVMe drives in a PCIe M.2 adaptor even if PCIe M.2 adaptor not found.
- This may allow creating NVMe volumes on 3rd party PCIe M.2 adaptors.
- Bug fix for when there's multiple expansion unit models only the last expansion unit was processed. Issue #288
- Bug fix for when there's multiple M2 adaptor card models only the last M2 card was processed.
- Bug fix for incorrectly matching model name variations as well as the exact model name.
- e.g. RX1217 matched RX1217, RX1217rp and RX1217sas.
Dave Russell
Curtis Doty
Ing
richard
ツ