v3.5.102
- Changed to use a faster method of detecting if an expansion unit is connected, for models with the syno_slot_mapping command.
- Changed so XPE users using the hdddb addon don't need to reboot.
v3.5.100-RC
- Changed to support "--restore --ssd=restore" to restore write_mostly when restoring all other changes. Issue #340
- When using --restore you can also use --ssd=restore, -e or --email
v3.5.96
- Added option to set writemostly for your internal HDDs so DSM will normally read from your faster internal SSD(s).
- It can automatically set DSM to read from your internal SSDs.
- Or you can tell the script which internal drive(s) DSM should read from.
v3.5.94
- Updated to support newer drive db versions.
- Synology added size_gb in host v7 version 8051.
- Synology added barebone_installable_v2 in host v7 version 8054.
- Bug fix when restoring where memcheck service was only re-enabled on DVA models.
- Changed to add leading 0 to short vids reported by drive.
- Sets 2 vids in case DSM uses the short one (e.g. 0x05dc=brand and 0x5dc=brand).
v3.5.94
- Updated to support newer drive db versions.
- Synology added size_gb in host v7 version 8051.
- Synology added barebone_installable_v2 in host v7 version 8054.
Note: You may need to run syno_hdd_db without the -n or --noupdate option, then update the drive database from
"Storage Manager > HDD/SSD > Settings > Advanced > Update Now" then run syno_hdd_db with your preferred options.
v3.5.90
- Changed to enable creating storage pools/volumes on NVMe drives in a PCIe M.2 adaptor in DSM 7.2
- Previously only supported DSM 7.2.1
- Changed to enable creating storage pools/volumes on NVMe drives in a PCIe M.2 adaptor even if PCIe M.2 adaptor not found.
- This may allow creating NVMe volumes on 3rd party PCIe M.2 adaptors.
- Bug fix for when there's multiple expansion unit models only the last expansion unit was processed. Issue #288
- Bug fix for when there's multiple M2 adaptor card models only the last M2 card was processed.
- Bug fix for incorrectly matching model name variations as well as the exact model name.
- e.g. RX1217 matched RX1217, RX1217rp and RX1217sas.
v3.4.83
- Fix for drives that exist in the drive database already but have "compatibility not_support".
- Affected drives were showing as "Incompatible" in storage manager.
v3.3.75
- Now saves changes.txt as <script-filename>_changes.txt when updating the script.
- To not overwrite changes.txt if my other scripts are in the same folder.
- Bug fix for detecting if script is located on M.2 drive.
- Minor bug fix.
Dave Russell
richard
ツ
leonpano2006