When Windows cannot name the folder of an inherited entry, such as for an item that was deleted after its descriptor was read or for a folder above it that the user cannot read, the module fills InheritedFrom with a fallback text. The callers removed the last character of every source, which belongs to the trailing backslash of a real folder, so the fallback read 'unknown paren'. The fallback also named an unknown parent for explicit entries, which have no source. Remove only a trailing backslash, and name an unknown parent for inherited entries only.
The regression tests fail without the fix in all four configurations for access entries and in both elevated configurations for audit entries. The cmdlet pages name the text, and the help file is generated again.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
Clear-NTFSAccess -DisableInheritance and Set-NTFSSecurityDescriptor took ownership of an item that the user owned already, left a DACL without the right to set an owner, and then reported a RestoreOwnerError for setting the same owner back. Skip the restore when the previous owner is the current user. The guards fail without the fix in all four configurations and also cover the owner that cannot be set back without the Restore privilege, the missing path of Get-ChildItem2, and the descriptor write that retries as owner.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
Reproduce and fix public rule paths, simplified audit comparisons and ReadData conversion, and boxed privilege equality. Add behavior guards for descriptor inheritance, unresolved identities, audit capability and recursive denial. Freeze this source for Release matrix measurement; final gate evidence and independent review follow.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
Where a computer doesn't offer the remote interface of the authorization
manager, the cmdlet calculates the result with the local one and warns
that the result might be inaccurate. Only localhost in lowercase counted
as this computer, so the cmdlet warned that the computer couldn't be
reached for ., LOCALHOST, or the computer name, although the local result
is the result of that computer. A name of this computer is now localhost
in any case, ., the NetBIOS name, the DNS host name, or the fully
qualified domain name.
From the security-reviewer pass over be04cb7..4ee01e5 (Nit 7),
reproduced in Windows PowerShell 5.1 and PowerShell 7 on a workstation
without the remote interface.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
From the security-reviewer pass over be04cb7..4ee01e5 (Minor 3 and 4):
ea2f6df compares the paths of folders without regard to case, which no
test covered; a parent folder in another case counted as not reported
before, so the folder was left out. The test of a drive root now expects
all of its entries instead of any. The page and the changelog say that
paths that differ only in case name the same folder.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
From the security-reviewer pass over be04cb7..4ee01e5 (Minor 1, 2, and
5, Nit 9):
- A path with a character that Windows doesn't allow, such as |, stopped
the pipeline in Windows PowerShell, where resolving the path throws an
ArgumentException; both cmdlets now write a non-terminating error with
the category InvalidArgument, also in PowerShell 7, where AlphaFS
rejects the path when it creates the link.
- The errors of New-NTFSSymbolicLink for an existing -Path and a missing
-Target, and of New-NTFSHardLink for a folder as -Target, named no path.
- New-NTFSSymbolicLink checked -Target before -Path, so that the two
cmdlets reported different errors for an existing -Path with a missing
-Target; both check -Path first now.
- The pages list objects with Path and Target as input of their own.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
New-NTFSHardLink and New-NTFSSymbolicLink now require -Path and -Target.
Without -Path, they failed with an index error; without -Target, they
used the current location, so New-NTFSSymbolicLink -Path Link created a
link to the current folder.
For a link that they can't create, they write a non-terminating
CreateHardLinkError or CreateSymbolicLinkError with the category
ResourceExists, ObjectNotFound, InvalidArgument, PermissionDenied, or
WriteError, and continue with the next object from the pipeline; they
stopped with a terminating error.
Fixed on the way: every object piped to the cmdlets failed with
GetDefaultValueFailed, because PowerShell reads a parameter that takes
pipeline input before it binds the input, and the getter of -Path threw
on the empty list. The pages show piping rows of a CSV file.
BREAKING CHANGE: a script that omits -Path or -Target gets a prompt, or
an error in a non-interactive session, and a script that relies on a
terminating error of the link cmdlets needs -ErrorAction Stop.
Decision 22, items 7 and 8: assumptions in autopilot, flagged for the
maintainer's review.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
Windows can't move a folder to another volume. Move-Item2 moved folders
with CopyAllowed, so AlphaFS copied and deleted them instead: an empty
folder was deleted without being created at the destination, and a
folder with files failed with an error that named one of its files.
Folders now move without CopyAllowed, and the cmdlet writes a MoveError
with the category InvalidOperation that names the folder and the
destination, and leaves the folder in place. A file still moves to
another volume; with -Force, it keeps the error of Windows, (17).
The tests move to \\localhost\C$, which Windows treats as another volume,
and run only elevated.
Decision 22, item 6: an assumption in autopilot, flagged for the
maintainer's review.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
When the computer of -ServerName can't be reached, the cmdlet calculates
the result with the group memberships known on this computer and warns.
The warning now names that computer, which a command with many items
couldn't tell otherwise. The live test expects the new text as well.
Decision 22, item 5: an assumption in autopilot, flagged for the
maintainer's review.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
Get-NTFSSimpleAccess compares each folder with its parent folder. A
folder whose parent folder it hadn't reported was left out, and with it
all of its subfolders; a drive root, which has no parent folder, was left
out or compared with the parent folder of the folder before it; and a
folder that came after its parent folder a second time failed with a
ReadError, "An item with the same key has already been added". Such
folders are now reported with all of their entries, and the paths are
compared without regard to case.
Decision 22, item 2: an assumption in autopilot, flagged for the
maintainer's review.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
Without the Security privilege, Get-NTFSOrphanedAudit read the item
without its SACL and returned nothing, which looked like an item without
orphaned entries, and it wrote a warning for an item that it couldn't
read. It now reads only the SACL, like Get-NTFSAudit, and writes a
ReadSecurityError with the category PermissionDenied or OpenError. The
error for a path that doesn't exist stays ReadError.
Decision 22, item 1: an assumption in autopilot, flagged for the
maintainer's review.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
- The conversions of a FileSystemSecurity2 to FileSecurity and
DirectorySecurity returned fields that were never set, so they gave
null; they return the descriptor, and the dead fields are gone
(finding 1).
- Equals of the entries and descriptors accepted the .NET type as well,
which doesn't know the wrapper, so equality depended on the direction;
only an object of the module can now be equal (finding 2).
- Invoke-TestsAsBasicUser.ps1 refuses a title with a line break, also a
final one, which $ let through (finding 6).
- The InheritedFrom test of the access entries checks a known parent
folder with two explicit entries in front; it fails on acfe3af
(finding 7).
Checked and kept: a callback ACE before the inherited entries doesn't
shift InheritedFrom, because .NET returns it as a rule (finding 3).
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
Equals of FileSystemAccessRule2, FileSystemAuditRule2, and
FileSystemSecurity2 cast its argument to the .NET type, which throws for
the wrapper types themselves: -eq and -contains, and in PowerShell 7 also
Select-Object -Unique and Compare-Object, stopped with an
InvalidCastException. GetHashCode of FileSystemSecurity2 read a field
that is never set and threw a NullReferenceException. Two objects are now
equal when they hold the same entry or descriptor, like the .NET types.
InheritedFrom: Win32.GetInheritedFrom returned the sources of the SACL
whenever the descriptor had one, also for the access entries, and the
callers gave the filtered entries of -ExcludeExplicit the sources of the
first entries of the ACL. Get-NTFSAccess -SecurityDescriptor stopped with
an ArgumentOutOfRangeException for a descriptor with audit entries, as
Get-NTFSSecurityDescriptor reads them in an elevated session. The method
now takes the ACL of the entries, and the callers map the sources before
they filter.
The coverage report of rc6 pointed at both; each test fails without its
fix.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
GetRelativePath treated every path that started with a dot as .\path and
dropped its first two characters, so a command on .gitignore read,
changed, or removed itignore in the same folder when that item existed;
Remove-Item2 -Path .RemoveMe removed emoveMe, and Copy-Item2 -Force with
the destination .CopyTarget overwrote opyTarget. Only .\ and ./ are now
stripped, and only .. and ..\ go up a folder; any other name is combined
with the current location. All path parameters resolve through this
method: -Path, -Destination, and -Target.
The coverage report of rc6 found the untested branch. The tests use a
decoy item with the shortened name and fail without the fix.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
- Copy-Item2 and Move-Item2 name a missing destination folder in a verbose
message with -WhatIf, like an existing destination (#108); the operation
itself fails with an error that names the folder (finding 1).
- Invoke-TestsAsBasicUser.ps1 refuses a title with a double quote or a
percent sign, which cmd.exe interprets inside the quoted argument, and
fails when waiting for the test process fails (findings 4 and 5).
- The page of Get-NTFSSimpleAccess says that ReadData is the right to list
a folder (ListDirectory), which the cmdlet reports as Read (finding 10).
Checked and kept: a UNC destination on a share that doesn't exist names
the share, which a new test pins (finding 3); the lab script refuses
machines outside the lab before it changes anything (finding 6).
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
The authorization manager of a computer answers only its administrators
and the members of its group Access Control Assistance Operators
(S-1-5-32-579); any other account gets "Access is denied" and no result.
A probe in the lab confirmed it on 2026-10-08: the delegated account got
error 5 without the membership and its rights with it.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
Add tests for the error handling that the cmdlets with -Path share: a
path that doesn't exist (16 cmdlets, and 6 audit cmdlets with the
Security privilege), an item whose owner may not read its permissions
(6 cmdlets), and an item whose owner may not change them, which the 6
cmdlets that write the DACL handle by taking ownership. Each error
belongs to its path only, and the cmdlet goes on with the next one.
The tests found one defect: Get-NTFSOrphanedAccess reported an item that
it couldn't read as an AddAceError with the category WriteError. It now
writes a ReadSecurityError, like Get-NTFSAccess.
They also show that the take-ownership retry works without privileges
when the account holds the Take Ownership right and may assign the
previous owner, and that it can't help a denied read, because reading
the owner needs the same right. Concepts and five cmdlet pages said that
the retry needs the privileges; they now describe both, and that Windows
removes the OWNER RIGHTS entries when the owner changes.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
The cmdlet read the item again for -PassThru inside the try block that
retries a denied write as the owner (R5 of the review of #113). A read
that was denied after a successful write therefore started another
attempt of the write and ended in a WriteSdError, and a write that
needed the ownership retry wrote no object at all.
The read now follows the write and its retry, and a failed read is a
ReadSecurityError. The page also says what happens when setting the
previous owner back fails.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
Windows can't list the names of a file on a network share and answers
with (50) The request is not supported. The new live tests found that
Get-NTFSHardLink then stopped with a terminating error, so that it
skipped the remaining paths, and that New-NTFSHardLink -PassThru did so
after it had created the link. A folder stopped Get-NTFSHardLink the
same way.
Both cmdlets now write a non-terminating GetHardLinkError and go on.
The tests reach the sandbox over the administrative share of its drive,
which behaves like the share of a file server, and skip where that share
isn't available, such as for a basic user. The pages describe the limit
on shares.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
The check for an existing destination looked for a file only. For a
folder whose name existed at the destination, the cmdlets failed in the
middle with a CopyError or a MoveError, and Copy-Item2 could copy a part
of the folder first. They now write DestinationFileAlreadyExists, as
for a file.
When the folder that is to contain the new item didn't exist, AlphaFS
reported a DirectoryNotFoundException that named the source item, which
reproduces the symptom of #21. The cmdlets now write an error that names
the missing folder, with the destination as the target. Copy-Item2 no
longer creates the missing folders for a folder: the workaround that
creates the destination folder for AlphaFS created its parents as well,
which only the prereleases of 5.0.0 did.
The pages also say that -Force merges a folder into an existing folder
of the same name, and that a folder can't move to another volume.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
Two deviations from the cmdlet page, found by new tests from its
contract:
- An entry that grants only ReadData became None: the reduction tested
the combined Read mask, and nothing mapped ReadData alone. .NET adds
Synchronize to every allow entry, which hid it; other tools write such
entries.
- With -IncludeRootFolder, on by default, a relative path with a single
folder name had no parent folder in the result, because the parent was
taken from the path before it was resolved.
The tests also cover the rights reduction, the comparison of folders
with their parent, the pipeline, the current location, -ExcludeExplicit,
files, and missing paths, elevated and as a basic user in both editions.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
Since this branch, Test-Path2 writes $false for a path that Windows
PowerShell rejects, such as one with a |, but it didn't say why. It now
writes the reason as a debug message. Only the lookup of the item is in
the try block, so that an error elsewhere in the cmdlet can't turn into
$false.
Found by the security review of fcb370e..00c3646 (finding 4).
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
A cmdlet that enables the Backup, Restore, Take Ownership, and Security
privileges decided which ones to disable on the states that it had read
when it enabled them, and stopped at the first one that failed. When
another command in the pipeline, such as Disable-Privileges, had disabled
one of them, the cmdlet stopped with "Priviledge already disabled" and
left the privileges after that one enabled. After an early stop, which
Dispose handles since this branch, it left them enabled without any
message, because PowerShell ignores exceptions thrown in Dispose; and
Disable-Privileges threw that exception in Dispose on every call while
the privileges were disabled. 4.2.6 already decided on the old states.
DisablePrivilege now reads the current state, and the cleanup tries every
privilege: in EndProcessing, a privilege that it can't disable gives a
warning; in Dispose, it is ignored.
The early-stop tests now pin EnablePrivileges and check that the cmdlet
had enabled the privileges, so that they can't pass without testing
anything.
Found by the security review of fcb370e..00c3646 (findings 1 to 3).
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
In Windows PowerShell, .NET rejects a path with a character that Windows
doesn't allow in names, such as | or <, and Test-Path2 stopped with the
terminating error "Illegal characters in path". Such an item can't
exist, so the cmdlet now writes false, as in PowerShell 7 and like
Test-Path. Add tests for every -PathType, long paths, relative paths,
and the pipeline, and for Get-DiskSpace, which had no tests.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
The cmdlets that enable the Backup, Restore, Take Ownership, and Security
privileges disabled them only in EndProcessing, which PowerShell skips
when a later command, such as Select-Object -First, or a terminating
error stops the pipeline. The privileges then stayed enabled in the
session. BaseCmdletWithPrivControl now implements IDisposable and
disables them in Dispose as well; Enable-Privileges keeps them.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
Get-NTFSEffectiveAccess -ServerName with a computer that can't be
resolved or reached returned no access, while it warned that it had
calculated the result on this computer. In that case,
AuthzInitializeRemoteResourceManager fails with RPC_S_SERVER_UNAVAILABLE
(1722); the code fell back to the local authorization manager only for
EPT_S_NOT_REGISTERED (1753), and GetEffectiveAccess swallowed the
exception. It now falls back for 1722 as well, as the cmdlet page
describes. The live tests in a lab found it; the new test in
Access.Tests.ps1 reproduces it on any computer.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
- Read the root folder for a volume name such as \\?\Volume{GUID}\ too,
like for a drive letter, and accept only the letters A to Z as a drive
- Report a security descriptor without the audit entries without naming a
missing Security privilege as the cause, which may not be the reason
- Skip the audit tests that change a descriptor from
Get-NTFSSecurityDescriptor in a session without the Security privilege
- Assert the absence of the old hint in the Get-NTFSEffectiveAccess test
- Narrow the drive-root note of Get-NTFSAccess to the security cmdlets
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
- #41: for the root of a drive, the cmdlets read and changed the security
descriptor of the drive, a device object. FileSystemSecurity2 now routes
drive roots through the path-based AlphaFS methods, which keep the
trailing backslash; the removal and inheritance helpers use it too.
- #109: Add-, Remove-, and Clear-NTFSAudit report a security descriptor
without the audit entries like Get-NTFSAudit, through one helper, and
Get-NTFSEffectiveAccess names the cause that Windows reported instead
of a missing Security privilege.
- #108: Copy-Item2 and Move-Item2 check the destination only for an
operation that runs; with -WhatIf, a verbose message names the conflict.
- #111: Disable-Privileges skips the privileges that the token doesn't
hold, the privilege messages are spelled right, and Get-FileHash2
declares the type name of its objects; 05-Releasing.md documents the
release metadata tests.
- rc3 review leftovers: Remove-NTFSAudit writes nothing for an item
without a SACL, the owner retry of Set-NTFSSecurityDescriptor restores
the previous owner in a finally block and keeps an owner that the
descriptor sets, and FileSystemSecurity2.Write with another item writes
only the sections that were read.
Each fix has a test that failed first, in Windows PowerShell 5.1 and
PowerShell 7; writing a drive root was checked once on a temporary VHD.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
- Set-NTFSSecurityDescriptor -Verbose names the sections that it writes,
or says that it writes nothing for an unchanged descriptor; its page
says "since it was read or last written" (review F-02).
- The pages of Enable-NTFSAccessInheritance, Disable-NTFSAccessInheritance,
and Set-NTFSInheritance get the #34 note, like the other fixed cmdlets
(review F-06).
- Set-TestOwner throws its own error when icacls fails, also when the
caller uses -ErrorAction Stop in Windows PowerShell (review F-07).
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
The access and audit cmdlets wrote the owner of an item back with the
entries they changed. For a DACL without the auto-inherit flag, Windows
returns the owner and the group even when only the DACL is read, and the
cmdlets wrote every section that the descriptor held. Without the Restore
privilege, or on a file server that refuses the owner, the write failed
with error 1307 (#34).
- Add-NTFSAccess, Clear-NTFSAccess, Add-NTFSAudit, and Clear-NTFSAudit
read only the DACL or the SACL. FileSystemSecurity2.Write(),
Remove-NTFSAccess, and Remove-NTFSAudit write only the sections they
read, which also fixes the access inheritance cmdlets.
- Read together with the SACL, the inherited entries of such a DACL lose
their inherited flag when the parent folder has no SACL, and the
cmdlets stored them as explicit copies. Get-NTFSSecurityDescriptor now
reads the DACL in a separate call.
- Set-NTFSSecurityDescriptor writes only the sections that changed since
they were read; an unchanged descriptor writes nothing (maintainer
decision of 2026-10-06).
- Clear-NTFSAudit writes nothing for an item without a SACL, and reports
an error without the Security privilege (maintainer decision).
The regression tests failed before and pass after the fix in Windows
PowerShell 5.1 and PowerShell 7, elevated and as a basic user.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
NTFSSecurity will be archived soon. The README, the documentation home,
which is also the wiki home, and the changelog now point users to
WindowsAccessControl, which is on the PowerShell Gallery. The changelog
entry also reaches the release notes of the next prerelease.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
Enable-NTFSAuditInheritance, Disable-NTFSAuditInheritance, and
Set-NTFSInheritance -AuditInheritanceEnabled failed with "(5) Access is
denied" for a file or folder without a SACL, also elevated with the
Security privilege. The cmdlets read only the audit section and changed
the flag that disables or enables audit inheritance. AlphaFS writes that
flag only together with a SACL, so it wrote no section at all, which
Windows denies; the retry as owner repeated the same write. An empty SACL
is now added first, but only to a descriptor that was read with its SACL.
The elevated CI runs of #100 to #106 showed this through the test of an
omitted -AccessInheritanceEnabled. From #104 on, the test that keeps the
inherited entries of a security descriptor failed as well: elevated,
Get-NTFSSecurityDescriptor reads the SACL, and Windows then returns a DACL
that isn't in the auto-inherit format, such as that of a file in the temp
folder of the user, without its inherited flags. The test now reads the
access section only and checks that the descriptor has inherited entries.
Tests: five cases for items without audit entries, red with "Access is
denied" before the fix; the test that keeps the explicit audit entries now
checks the errors and the inheritance state of both calls; a test checks
that a descriptor read without its audit entries gets no SACL, which would
replace the audit entries of the item when it is written.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
Set the prerelease label rc2, describe the module as a PowerShell module in
the manifest, which the PowerShell Gallery shows, and keep the README free
of a prerelease version, which outlives the release. Tests check the
description, that the published 5.0.0-rc1 isn't reused, and the README.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
An empty Get-ChildItem2 -Attributes value, such as 0 or None in
PowerShell 7, matched every item and returned hidden items as well; it now
stops the cmdlet with AttributesEmpty, as Get-ChildItem rejects it. The page
says that the + and ! operators of Get-ChildItem aren't supported and that
-Recurse still enters hidden folders, and the changelog says that a call
with several attributes now returns more items. The type data test starts
Windows PowerShell, where the import failed, from both CI legs and checks
that LengthOnDisk is still there.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
The types file added the alias Size of LengthOnDisk to System.IO.FileInfo.
Type data can't replace an existing member, so in Windows PowerShell the
import failed when another module had added a Size member first (#82).
BREAKING CHANGE: use LengthOnDisk instead of Size.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
Get-ChildItem2 -Attributes returned only the items that had all the listed
attributes, so -Attributes Hidden, ReadOnly returned nothing where
Get-ChildItem returns both kinds of items. It now returns the items that have
any of them (#5).
BREAKING CHANGE: to get only the items with all the listed attributes,
filter the result with Where-Object, as the cmdlet page shows.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
FileSystemSecurity.RemoveAccessRule rebuilds a rule that doesn't match an
entry exactly and rejects generic rights then, so removing an entry with
GENERIC_ALL failed with "The value '269484032' is not valid". Windows keeps
generic rights in the inherit-only entries of folders. Such a rule is now
removed through ModifyAccessRule, without the added Synchronize right
(#17).
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
Mark the Set-NTFSInheritance change as breaking and warn that scripts that
used it to drop the inherited access entries now leave broader access in
place. Report any failure to create the hash algorithm as
HashAlgorithmNotAvailable, assert that error ID, check that the
MACTripleDES warning appears once, and guard the descriptor test.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
Windows PowerShell binds an object that is passed by position to a string
parameter through ToString, which returns only the name of a child item, so
the cmdlets looked for it in the current location. The path parameters now
convert file and folder objects to their full path (#88).
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
A variable named PWD in the scope of the caller, such as a loop variable,
hid the automatic variable, and every cmdlet failed with a
NullReferenceException, also for an absolute path. The cmdlets now read
the current file system location from the session state, and only for a
relative path (#86).
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
The message overloads of BaseCmdletWithPrivControl hide the methods of
Cmdlet, so every message went through string.Format, also one without
arguments. A path with braces in it, such as C:\Data\{Archive}, then
stopped the cmdlet with a FormatException (#3).
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
-AccessInheritanceEnabled $false now copies the inherited access entries
into the DACL, and -AuditInheritanceEnabled $true keeps the explicit audit
entries, as Disable-NTFSAccessInheritance and Enable-NTFSAuditInheritance
do without their switches (Decision 13).
BREAKING CHANGE: to remove the entries, use
Disable-NTFSAccessInheritance -RemoveInheritedAccessRules or
Enable-NTFSAuditInheritance -RemoveExplicitAuditRules.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
Disable-NTFSAuditInheritance -RemoveInheritedAccessRules is now
-RemoveInheritedAuditRules, and Enable-NTFSAuditInheritance
-RemoveExplicitAccessRules is now -RemoveExplicitAuditRules. The old names
remain aliases, so existing scripts keep working.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
Get-FileHash2 failed in PowerShell 7 for every algorithm, because the hash
method referenced RIPEMD160, which .NET Core and later lack. RIPEMD160 and
MACTripleDES are now created by name; requesting one where .NET lacks it
stops the cmdlet with an error that names the algorithm and points to
Windows PowerShell 5.1. MACTripleDES uses a random key, so its result
differs on every call; the value is deprecated, and the cmdlet warns when
it is used.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
Copy-Item2, Move-Item2, and Remove-Item2 wrote the item with -PassThru
also when -WhatIf or a declined confirmation skipped the operation.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
Copy-Item2 and Move-Item2 named the source path as the destination,
Disable-Privileges said that the privileges were now enabled, and the
warning of Get-NTFSEffectiveAccess misspelled the privilege.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
Defect 22:
- [OutputType]: Test-Path2 writes System.Boolean, not file objects;
Get-FileHash2 writes the file object with Hash and Algorithm, not access
rules; Add-NTFSAudit and Remove-NTFSAudit write audit entries since
defect 6; Copy-Item2, Move-Item2, Remove-Item2, and the five inheritance
cmdlets with -PassThru declared no type.
- Enable-Privileges and Disable-Privileges with -PassThru wrote the
privileges as one collection; they now enumerate it.
- New-NTFSSymbolicLink -PassThru returned a FileInfo for a link to a
folder; it now returns a DirectoryInfo.
The OUTPUTS sections of the pages name the same types.
Tests/OutputTypes.Tests.ps1 (new): 15 tests; Disable-Privileges and the
symbolic link need privileges and run in CI.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
The cmdlets that take ownership of an item to repeat a denied operation
left the account that ran them as the owner when the second attempt failed
as well. BaseCmdlet.InvokeAsOwner now restores the previous owner on every
exit path and reports a failed restore as RestoreOwnerError.
Add-NTFSAccess, Add-NTFSAudit, Remove-NTFSAccess, and Remove-NTFSAudit
wrote the unchanged entries of an item with -PassThru after a failed
change; they now continue with the next path.
The inheritance tests assert the error identity and cover a missing path
on every runner.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
Found while fixing defect 3, in the same loop: the hash variable lived
outside the loop, and after a GetHashError the cmdlet still wrote a
result for the file, with the hash of the previous file. Each path now
starts without a hash, and a failed read writes only the error.
Tests/FileHash.Tests.ps1: 1 test with a file opened without sharing;
like the other Get-FileHash2 tests, it skips in PowerShell 7 until the
RIPEMD160 reference goes (decision D5).
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: AI Assistant <ai@example.com>
Raimund Andree