NTFSSecurity/Docs/Concepts.md

Concepts

This page explains the Windows security concepts that the NTFSSecurity cmdlets work with: security descriptors, accounts, access rights, inheritance, privileges, long paths, and the module settings. Read it before you change permissions on production data.

Security descriptors

Every file and folder on an NTFS volume has a security descriptor. The module manages three of its parts:

Part	Purpose	Cmdlets
Owner	The account that owns the item. The owner can always read and change the item's permissions.	Get-NTFSOwner, Set-NTFSOwner
Discretionary access control list (DACL)	Access control entries (ACEs) that allow or deny access.	Get-NTFSAccess, Add-NTFSAccess, Remove-NTFSAccess, Clear-NTFSAccess
System access control list (SACL)	Audit entries that tell Windows which access attempts to write to the Security event log.	Get-NTFSAudit, Add-NTFSAudit, Remove-NTFSAudit, Clear-NTFSAudit

Each entry is either explicit, which means it is set on the item itself, or inherited from a parent folder. Inheritance is controlled separately for the DACL and the SACL; see Inheritance.

Most cmdlets accept either -Path or -SecurityDescriptor:

• With -Path, the cmdlet reads or writes the item directly. -Path accepts pipeline input, so you can pipe the output of Get-ChildItem, Get-ChildItem2, or Get-Item2 into the cmdlet.
• With -SecurityDescriptor, the cmdlet changes a security descriptor object that you got from Get-NTFSSecurityDescriptor. Nothing is written to disk until you pass the object to Set-NTFSSecurityDescriptor, so you can make several changes and write them in one step.

When you pass a security descriptor to Add-NTFSAccess, Remove-NTFSAccess, Add-NTFSAudit, or Remove-NTFSAudit, also specify -AppliesTo or the -InheritanceFlags and -PropagationFlags parameters. Without them, PowerShell cannot choose between the two security descriptor parameter sets and reports that the parameter set cannot be resolved.

Accounts

The -Account parameter accepts an account name, such as CONTOSO\JohnDoe, BUILTIN\Users, or NT AUTHORITY\SYSTEM, or a security identifier (SID) string, such as S-1-5-32-545. The output shows the account name when Windows can resolve the SID.

An entry whose SID no longer resolves to an account is called orphaned. This happens when an account was deleted. Get-NTFSOrphanedAccess and Get-NTFSOrphanedAudit list such entries. A SID can also fail to resolve temporarily, for example when a domain controller is unreachable, so check the results before you remove them.

Access rights

The -AccessRights parameter takes a FileSystemRights2 value. You can combine values by passing a list, for example -AccessRights Delete, DeleteSubdirectoriesAndFiles.

PowerShell also accepts any unambiguous prefix of a value name, so Full binds to FullControl and Mod binds to Modify. Use the full names in scripts.

Basic permissions

The basic permissions on the Security tab of the file or folder properties are combinations of the advanced permissions:

-AccessRights value	Includes	Basic permission
Read	ListDirectory, ReadAttributes, ReadExtendedAttributes, ReadPermissions	Read
ReadAndExecute	Read and Traverse	Read & execute
Write	CreateFiles, CreateDirectories, WriteAttributes, WriteExtendedAttributes	Write
Modify	ReadAndExecute, Write, and Delete	Modify
FullControl	Modify, DeleteSubdirectoriesAndFiles, ChangePermissions, TakeOwnership, and Synchronize	Full control

Advanced permissions

Several advanced permissions have two names because the same bit means something different for files and for folders. The output always shows the first name in the table.

-AccessRights value	Shown as	Advanced permission	Effect
ListDirectory, ReadData	ListDirectory	List folder / read data	List the contents of a folder; read the data of a file.
CreateFiles, WriteData	CreateFiles	Create files / write data	Create files in a folder; change or overwrite the data of a file.
CreateDirectories, AppendData	CreateDirectories	Create folders / append data	Create subfolders; append data to the end of a file.
Traverse, ExecuteFile	Traverse	Traverse folder / execute file	Move through a folder to reach items below it; run a program file.
ReadAttributes	ReadAttributes	Read attributes	Read attributes such as read-only and hidden.
WriteAttributes	WriteAttributes	Write attributes	Change attributes such as read-only and hidden.
ReadExtendedAttributes	ReadExtendedAttributes	Read extended attributes	Read the extended attributes that programs define.
WriteExtendedAttributes	WriteExtendedAttributes	Write extended attributes	Change the extended attributes that programs define.
DeleteSubdirectoriesAndFiles	DeleteSubdirectoriesAndFiles	Delete subfolders and files	Delete items in a folder, even without Delete on those items.
Delete	Delete	Delete	Delete the item.
ReadPermissions	ReadPermissions	Read permissions	Read the owner and the permissions.
ChangePermissions	ChangePermissions	Change permissions	Change the permissions.
TakeOwnership	TakeOwnership	Take ownership	Make yourself the owner.
Synchronize	Synchronize	Not shown	Wait on a file handle.

Windows adds Synchronize to every allow entry except FullControl, which already contains it. Reading an entry back therefore shows, for example, Modify, Synchronize.

Windows also merges entries that have the same account, type, and inheritance settings. Adding Read and then Write for the same account results in one entry with both rights.

The generic rights GenericRead, GenericWrite, GenericExecute, and GenericAll are mapped by Windows to the file rights above. On a folder that passes the entry on to its children, Windows stores two entries: one with the mapped rights for the folder and one that keeps the generic right for the child items.

Get-NTFSSimpleAccess works on folders only. It condenses the rights of each entry into the simple values Read, Write, and Delete. For every folder after the first one, it reports only the entries that differ from the parent folder, which shows where the permissions change in a folder tree.

Inheritance

A folder passes its inheritable entries on to its child items. You can stop an item from inheriting entries, separately for access entries and for audit entries:

• Disable-NTFSAccessInheritance blocks inheritance. By default, it copies the inherited entries as explicit entries; -RemoveInheritedAccessRules drops them instead.
• Enable-NTFSAccessInheritance restores inheritance and keeps the explicit entries unless you use -RemoveExplicitAccessRules.
• Get-NTFSInheritance and Set-NTFSInheritance read and set both settings at once. Unlike the dedicated cmdlets, Set-NTFSInheritance removes the inherited access entries when it turns access inheritance off, and removes the explicit audit entries when it turns audit inheritance on. The audit equivalents of the dedicated cmdlets are Disable-NTFSAuditInheritance and Enable-NTFSAuditInheritance.

The AppliesTo parameter

Whether and how an entry is passed on is defined by its inheritance flags and propagation flags. The -AppliesTo parameter of Add-NTFSAccess, Remove-NTFSAccess, Add-NTFSAudit, and Remove-NTFSAudit sets both with the names that the Applies to list in the Advanced Security Settings dialog uses:

-AppliesTo value	InheritanceFlags	PropagationFlags	Applies to
ThisFolderOnly	None	None	This folder only
ThisFolderSubfoldersAndFiles	ContainerInherit, ObjectInherit	None	This folder, subfolders and files
ThisFolderAndSubfolders	ContainerInherit	None	This folder and subfolders
ThisFolderAndFiles	ObjectInherit	None	This folder and files
SubfoldersAndFilesOnly	ContainerInherit, ObjectInherit	InheritOnly	Subfolders and files only
SubfoldersOnly	ContainerInherit	InheritOnly	Subfolders only
FilesOnly	ObjectInherit	InheritOnly	Files only

Each value also exists with the suffix OneLevel, for example ThisFolderAndSubfoldersOneLevel. These values add the NoPropagateInherit propagation flag, which passes the entry on to the direct children only. In the dialog, this is the check box Only apply these permissions to objects and/or containers within this container.

The flags mean:

• ContainerInherit: child folders inherit the entry.
• ObjectInherit: child files inherit the entry.
• InheritOnly: the entry applies only to the children, not to the item that holds it.
• NoPropagateInherit: the entry is passed on one level only.

Add-NTFSAccess and Add-NTFSAudit use ThisFolderSubfoldersAndFiles by default. Files have no children, so entries on files are stored without inheritance flags.

Privileges

Windows grants the following privileges to the local Administrators group. They bypass the permission checks that would otherwise stop you from reading or changing an item:

Privilege	Windows name	What it allows
Backup	SeBackupPrivilege	Read any file or folder, regardless of its permissions.
Restore	SeRestorePrivilege	Write any file or folder and set any account as the owner.
Take ownership	SeTakeOwnershipPrivilege	Make yourself the owner of any item.
Security	SeSecurityPrivilege	Read and change audit entries (the SACL).

A privilege can only be enabled if the account holds it and the PowerShell session runs elevated (Run as administrator).

The access, audit, inheritance, owner, and security descriptor cmdlets enable these privileges automatically while they run and disable the ones they enabled when they finish. If a privilege cannot be enabled, the cmdlet continues without it. You can turn this behavior off with the EnablePrivileges module setting. The inheritance cmdlets are an exception: they always try to enable the privileges, and when EnablePrivileges is $false, they leave them enabled.

Enable-Privileges enables the four privileges for the current PowerShell process until you run Disable-Privileges or close the session. Get-Privileges lists the privileges of the current process and their state.

When reading or changing an item fails with an access-denied error, most of these cmdlets make the current user the owner of the item, retry, and then restore the previous owner. This requires the privileges above.

Reading or changing audit entries always requires the Security privilege. Without it, the audit cmdlets fail, and Get-NTFSEffectiveAccess warns that it might not be able to read the effective permissions.

Long paths

Windows PowerShell 5.1 cannot handle paths longer than 260 characters; Get-ChildItem fails on them. The cmdlets Get-ChildItem2, Get-Item2, Copy-Item2, Move-Item2, Remove-Item2, and Test-Path2 use the AlphaFS library and work with long paths. Their output binds to the -Path parameter of the NTFSSecurity cmdlets, which handle long paths as well:

Get-ChildItem2 -Path C:\Data -Recurse | Get-NTFSAccess -ExcludeInherited

The module defines the aliases dir2 for Get-ChildItem2, gi2 for Get-Item2, and rm2 and del2 for Remove-Item2.

Extended file and folder objects

The module extends the FileInfo and DirectoryInfo objects that Get-Item and Get-ChildItem return. These members are not available on the AlphaFS objects that the *-Item2 cmdlets return.

Member	Type	Available on	Description
Owner	Property	Files and folders	The owner of the item.
IsInheritanceBlocked	Property	Files and folders	$true if the item does not inherit access entries.
LengthOnDisk	Property	Files	The file size rounded up to whole clusters of the volume. Size is an alias.
EnableInheritance()	Method	Files and folders	Turns on access inheritance.
DisableInheritance()	Method	Files and folders	Turns off access inheritance. Pass $false to drop the inherited entries instead of copying them.
GetHash()	Method	Files	Returns the SHA1 hash of the file as a hexadecimal string.

Access entries returned by Get-NTFSAccess have an additional AccountType property. When the current user is a domain account, reading the property queries Active Directory and returns the object class of the account, such as user or group; otherwise, the property is empty.

Module settings

The PrivateData section of NTFSSecurity.psd1 contains switches that change the module's behavior:

Setting	Default	Effect
EnablePrivileges	$true	The security cmdlets enable the Backup, Restore, Take Ownership, and Security privileges while they run.
GetInheritedFrom	$true	Get-NTFSAccess and Get-NTFSAudit fill the InheritedFrom property with the path of the folder that an inherited entry comes from.
GetFileSystemModeProperty	$true	Get-ChildItem2 adds the Mode property to its output.
IdentifyHardLinks	$true	Get-ChildItem2 adds a HardLinkCount property to each file.
ShowAccountSid	$false	The default table output of access and audit entries shows the SID next to the account name.

GetInheritedFrom, GetFileSystemModeProperty, and IdentifyHardLinks cost extra work for every item. Turn them off to speed up large folder trees when you don't need the information.

To change a setting for the current session only, change the value after you import the module:

(Get-Module -Name NTFSSecurity).PrivateData.ShowAccountSid = $true

To change the default, edit NTFSSecurity.psd1 in the module folder.