@ -28,7 +28,11 @@
# Solve issue of --restore option restoring files that were backed up with older DSM version.
# DONE
# Changed help to show -r, --ram also sets max memory to the amount of installed memory.
# Now enables any installed Synology M.2 PCIe cards for models that don't officially support them.
#
# Added -i, --immutable option to enable immutable snapshots on models older than '20 series running DSM 7.2.
#
# Changed help to show that -r, --ram also sets max memory to the amount of installed memory.
#
# Changed the "No M.2 cards found" to "No M.2 PCIe cards found" to make it clearer.
#
@ -58,6 +62,9 @@
# Autoupdate logs update success or errors to DSM system log.
#
# Added -w, --wdda option to disable WDDA
# https://kb.synology.com/en-us/DSM/tutorial/Which_Synology_NAS_supports_WDDA
# https://www.youtube.com/watch?v=cLGi8sPLkLY
# https://community.synology.com/enu/forum/1/post/159537
#
#
# Added --restore info to --help
@ -178,16 +185,16 @@
# Optionally disable "support_disk_compatibility".
scriptver = "v2. 3.54 "
scriptver = "v3.0.5 5"
script = Synology_HDD_db
repo = "007revad/Synology_HDD_db"
# Check BASH variable is is non-empty and posix mode is off, else abort with error.
[ " $BASH " ] && ! shopt -qo posix || {
# Check BASH variable is bash
if [ ! " $( basename " $BASH " ) " = bash ] ; then
echo " This is a bash script. Do not run it with $( basename " $BASH " ) "
printf \\ a
printf >& 2 "This is a bash script, don't run it with sh\n"
exit 1
}
fi
#echo -e "bash version: $(bash --version | head -1 | cut -d' ' -f4)\n" # debug
@ -221,6 +228,8 @@ Options:
-r, --ram Disable memory compatibility checking ( DSM 7.x only) ,
and sets max memory to the amount of installed memory
-w, --wdda Disable WD WDDA
-i, --immutable Enable immutable snapshots on models older than
20-series ( DSM 7.2 and newer only) .
--restore Undo all changes made by the script
--autoupdate= AGE Auto update script ( useful when script is scheduled)
AGE is how many days old a release must be before
@ -249,7 +258,7 @@ args=("$@")
# Check for flags with getopt
if options = " $( getopt -o abcdefghijklmnopqrstuvwxyz0123456789 -l \
restore,showedits,noupdate,nodbupdate,m2,force,ram,wdda,autoupdate:,help,version,debug \
restore,showedits,noupdate,nodbupdate,m2,force,ram,wdda,immutable, autoupdate:,help,version,debug \
-- " $@ " ) " ; then
eval set -- " $options "
while true; do
@ -273,6 +282,9 @@ if options="$(getopt -o abcdefghijklmnopqrstuvwxyz0123456789 -l \
-r| --ram) # Disable "support_memory_compatibility"
ram = yes
; ;
-i| --immutable) # Enable "support_worm" (immutable snapshots)
immutable = yes
; ;
-w| --wdda) # Disable "support_memory_compatibility"
wdda = no
; ;
@ -337,6 +349,7 @@ fi
# cut -d"/" -f5 | cut -d"_" -f1 | uniq)
model = $( cat /proc/sys/kernel/syno_hw_version)
modelname = " $model "
# Show script version
@ -360,10 +373,12 @@ model=${model,,}
# Check for dodgy characters after model number
if [ [ $model = ~ 'pv10-j' $ ] ] ; then # GitHub issue #10
model = ${ model %?????? } + # replace last 6 chars with +
modelname = ${ modelname %?????? } + # replace last 6 chars with +
model = ${ model %?????? } + # replace last 6 chars with +
echo -e " \nUsing model: $model "
elif [ [ $model = ~ '-j' $ ] ] ; then # GitHub issue #2
model = ${ model %?? } # remove last 2 chars
modelname = ${ modelname %?? } # remove last 2 chars
model = ${ model %?? } # remove last 2 chars
echo -e " \nUsing model: $model "
fi
@ -1100,6 +1115,52 @@ while [[ $num -lt "${#nvmes[@]}" ]]; do
done
#------------------------------------------------------------------------------
# Enable unsupported Synology M2 PCIe cards
enable_card( ) {
if [ [ -f $1 ] ] && [ [ -n $2 ] ] ; then
# Check if section exists
if ! grep '^\[' " $2 " '\]$' " $1 " ; then
echo -e " Section [ $2 ] not found in $( basename -- " $1 " ) ! " >& 2
return
fi
# Check if already enabled
val = $( get_section_key_value " $1 " " $2 " " $modelname " )
if [ [ $val != "yes" ] ] ; then
if set_section_key_value " $1 " " $2 " " $modelname " yes; then
echo -e " Enabled $1 for $modelname " >& 2
else
echo -e " ${ Error } ERROR 5 ${ Off } Failed to enable $1 for ${ modelname } ! " >& 2
fi
else
echo -e " $1 already enabled for $modelname " >& 2
fi
fi
}
for c in " ${ !m2cards[@] } " ; do
echo ""
m2cardconf = "/usr/syno/etc.defaults/adapter_cards.conf"
case " $c " in
E10M20-T1)
enable_card " $m2cardconf " E10M20-T1_sup_nvme
enable_card " $m2cardconf " E10M20-T1_sup_sata
; ;
M2D20)
enable_card " $m2cardconf " M2D20_sup_nvme
; ;
M2D18)
enable_card " $m2cardconf " M2D18_sup_nvme
enable_card " $m2cardconf " M2D18_sup_sata
; ;
M2D17)
enable_card " $m2cardconf " M2D17_sup_sata
; ;
esac
done
#------------------------------------------------------------------------------
# Edit /etc.defaults/synoinfo.conf
@ -1301,13 +1362,12 @@ fi
# Optionally disable "support_wdda"
wdda = support_wdda
setting = " $( get_key_value $synoinfo $wdda ) "
setting = " $( get_key_value $synoinfo support_wdda) "
if [ [ $wdda = = "no" ] ] ; then
if [ [ $setting = = "yes" ] ] ; then
# Disable support_memory_compatibility
synosetkeyvalue " $synoinfo " " $wdda " "no"
setting = " $( get_key_value " $synoinfo " $wdda ) "
synosetkeyvalue " $synoinfo " support_wdda "no"
setting = " $( get_key_value " $synoinfo " support_wdda ) "
if [ [ $setting = = "no" ] ] ; then
echo -e "\nDisabled support WDDA."
fi
@ -1317,6 +1377,22 @@ if [[ $wdda == "no" ]]; then
fi
# Optionally enable "support_worm" (immutable snapshots)
setting = " $( get_key_value $synoinfo support_worm) "
if [ [ $immutable = = "yes" ] ] ; then
if [ [ $setting != "yes" ] ] ; then
# Disable support_memory_compatibility
synosetkeyvalue " $synoinfo " support_worm "yes"
setting = " $( get_key_value " $synoinfo " support_worm) "
if [ [ $setting = = "yes" ] ] ; then
echo -e "\nEnabled Immutable Snapshots."
fi
elif [ [ $setting = = "no" ] ] ; then
echo -e "\nImmutable Snapshots already enabled."
fi
fi
#------------------------------------------------------------------------------
# Finished
Dave Russell
3 years ago
GitHub