@ -24,11 +24,49 @@
# TODO
# Bypass M.2 volume lock for unsupported M.2 drives.
# See https://github.com/007revad/Synology_enable_M2_volume
#
# Maybe also edit the other disk compatibility db in synoboot, used during boot time.
# It's also parsed and checked and probably in some cases it could be more critical to patch that one instead.
# DONE
# Improved shell output when editing max memory setting.
#
# Changed method of checking if drive is a USB drive to prevent ignoring internal drives on RS models.
#
# Changed to not run "synostgdisk --check-all-disks-compatibility" in DSM 6.2.3 (which has no synostgdisk).
#
# Now edits max supported memory to match the amount of memory installed, if greater than the current max memory setting.
#
# Now allows creating M.2 storage pool and volume all from Storage Manager
#
# Now always shows your drive entries in the host db file if -s or --showedits used,
# instead of only db file was edited during that run.
#
# Changed to show usage if invalid long option used instead of continuing.
#
# Fixed bug inserting firmware version for already existing model.
#
# Changed to add drives' firmware version to the db files (to support data deduplication).
# See https://github.com/007revad/Synology_enable_Deduplication
#
# Changed to be able to edit existing drive entries in the db files to add the firmware version.
#
# Now supports editing db files that don't currently have any drives listed.
#
# Fixed bug where the --noupdate option was coded as --nodbupdate. Now either will work.
#
# Fixed bug in re-enable drive db updates
#
# Fixed "download new version" failing if script was run via symlink or ./<scriptname>
#
# Changed to show if no M.2 cards were found, if M.2 drives were found.
#
# Changed latest version check to download to /tmp and extract files to the script's location,
# replacing the existing .sh and readme.txt files.
#
# Added a timeouts when checking for newer script version in case github is down or slow.
#
# Added option to disable incompatible memory notifications.
#
# Now finds your expansion units' model numbers and adds your drives to their db files.
@ -53,7 +91,6 @@
#
# Fixed bug where "M.2 volume support already enabled" message appeared when NAS had no M.2 drives.
#
#
# Added check that M.2 volume support is enabled (on supported models).
#
# Added support for M.2 SATA drives.
@ -84,7 +121,7 @@
# Optionally disable "support_disk_compatibility".
scriptver = "v1. 2.18"
scriptver = "v2.1.3 8"
script = Synology_HDD_db
repo = "007revad/Synology_HDD_db"
@ -110,16 +147,16 @@ $script $scriptver - by 007revad
Usage: $( basename " $0 " ) [ options]
Options:
-s, --showedits Show the edits made to host db file( s)
-s, --showedits Show edits made to <model>_ host db and db.new file( s)
-n, --noupdate Prevent DSM updating the compatible drive databases
-m, --m2 Don' t process M.2 drives
-f, --force Force DSM to not check drive compatibility
-r, --ram Disable memory compatibility checking
-h, --help Show this help message
-v, --version Show the version
-v, --version Show the script version
EOF
exit 0
exit 0
}
@ -129,20 +166,24 @@ $script $scriptver - by 007revad
See https://github.com/$repo
EOF
exit 0
exit 0
}
# Save options used
args = " $@ "
# Check for flags with getopt
if options = " $( getopt -o abcdefghijklmnopqrstuvwxyz0123456789 -a \
-l showedits,noupdate,m2,force,ram,help,version -- " $@ " ) " ; then
-l showedits,noupdate,nodbupdate, m2,force,ram,help,version,debug -- " $@ " ) " ; then
eval set -- " $options "
while true; do
case " ${ 1 ,, } " in
-s| --showedits) # Show edits done to host db file
showedits = yes
; ;
-n| --nodbupdate) # Disable disk compatibility db updates
-n| --nodbupdate| --noupdate) # Disable disk compatibility db updates
nodbupdate = yes
; ;
-m| --m2) # Don't add M.2 drives to db files
@ -160,17 +201,29 @@ if options="$(getopt -o abcdefghijklmnopqrstuvwxyz0123456789 -a \
-v| --version) # Show script version
scriptversion
; ;
-d| --debug) # Show and log debug info
debug = yes
; ;
--)
shift
break
; ;
*) # Show usage options
echo " Invalid option ' $1 ' "
echo -e " Invalid option ' $1 '\n "
usage " $1 "
; ;
esac
shift
done
else
echo
usage
fi
if [ [ $debug = = "yes" ] ] ; then
# set -x
export PS4 = '`[[ $? == 0 ]] || echo "\e[1;31;40m($?)\e[m\n "`:.$LINENO:'
fi
@ -196,15 +249,19 @@ model=$(cat /proc/sys/kernel/syno_hw_version)
# Show script version
#echo -e "$script $scriptver\ngithub.com/$repo\n"
echo " $script $scriptver "
#echo "github.com/$repo"
# Show NAS info
# Get DSM full version
productversion = $( get_key_value /etc.defaults/VERSION productversion)
buildphase = $( get_key_value /etc.defaults/VERSION buildphase)
buildnumber = $( get_key_value /etc.defaults/VERSION buildnumber)
smallfixnumber = $( get_key_value /etc.defaults/VERSION smallfixnumber)
# Show DSM full version and model
if [ [ $buildphase = = GM ] ] ; then buildphase = "" ; fi
echo " $model DSM $productversion $buildphase "
echo ""
if [ [ $smallfixnumber -gt "0" ] ] ; then smallfix = " - $smallfixnumber " ; fi
echo " $model DSM $productversion - $buildnumber $smallfix $buildphase
# Convert model to lower case
@ -213,66 +270,138 @@ model=${model,,}
# Check for dodgy characters after model number
if [ [ $model = ~ 'pv10-j' $ ] ] ; then # GitHub issue #10
model = ${ model %?????? } + # replace last 6 chars with +
echo -e " \nUsing model: $model "
elif [ [ $model = ~ '-j' $ ] ] ; then # GitHub issue #2
model = ${ model %?? } # remove last 2 chars
echo -e " \nUsing model: $model "
fi
# Show options used
echo " Using options: $args "
#echo "" # To keep output readable
#------------------------------------------------------------------------------
# Check latest release with GitHub API
get_latest_release( ) {
curl --silent " https://api.github.com/repos/ $1 /releases/latest " |
# Curl timeout options:
# https://unix.stackexchange.com/questions/94604/does-curl-have-a-timeout
curl --silent -m 10 --connect-timeout 5 \
" https://api.github.com/repos/ $1 /releases/latest " |
grep '"tag_name":' | # Get tag line
sed -E 's/.*"([^"]+)".*/\1/' # Pluck JSON value
}
tag = $( get_latest_release "007revad/Synology_HDD_db " )
tag = $( get_latest_release " $repo )
shorttag = " ${ tag : 1 } "
#scriptpath=$(dirname -- "$0")
# Get script location
# https://stackoverflow.com/questions/59895/
source = ${ BASH_SOURCE [0] }
while [ -L " $source " ] ; do # Resolve $source until the file is no longer a symlink
scriptpath = $( cd -P " $( dirname " $source " ) " >/dev/null 2>& 1 && pwd )
source = $( readlink " $source " )
# If $source was a relative symlink, we need to resolve it
# relative to the path where the symlink file was located
[ [ $source != /* ] ] && source = $scriptpath /$source
done
scriptpath = $( cd -P " $( dirname " $source " ) " >/dev/null 2>& 1 && pwd )
#echo "Script location: $scriptpath" # debug
if [ [ $HOME = ~ /var/services/* ] ] ; then
shorthome = ${ HOME : 14 }
else
shorthome = " $HOME "
fi
if ! printf "%s\n%s\n" " $tag " " $scriptver " |
sort --check --version-sort & > /dev/null ; then
echo -e " ${ Cyan } There is a newer version of this script available. ${ Off } "
echo -e " \n ${ Cyan } There is a newer version of this script available. ${ Off } "
echo -e " Current version: ${ scriptver } \nLatest version: $tag "
if [ [ ! -d $HOME ] ] ; then
# Can't download to home
if [ [ -f $scriptpath /$script -$shorttag .tar.gz ] ] ; then
# They have the latest version tar.gz downloaded but are using older version
echo " https://github.com/ $repo /releases/latest "
sleep 10
elif [ [ -f $HOME /$script -$shorttag .tar.gz ] ] ; then
# Latest version tar.gz in home but they' re using older version
elif [ [ -d $scriptpath /$script -$shorttag ] ] ; then
# They have the latest version extracted but a re using older version
echo " https://github.com/ $repo /releases/latest "
sleep 10
else
echo -e " ${ Cyan } Do you want to download $tag now? ${ Off } { y/n] "
echo -e " ${ Cyan } Do you want to download $tag now? ${ Off } [ y/n] "
read -r -t 30 reply
if [ [ ${ reply ,, } = = "y" ] ] ; then
if ! curl -LJO " https://github.com/ $repo /archive/refs/tags/ $tag .tar.gz " ; then
echo -e " ${ Error } ERROR ${ Off } Failed to download $script - $shorttag .tar.gz! "
if cd /tmp; then
url = " https://github.com/ $repo /archive/refs/tags/ $tag .tar.gz "
if ! curl -LJO -m 30 --connect-timeout 5 " $url " ;
then
echo -e " ${ Error } ERROR ${ Off } Failed to download " \
" $script - $shorttag .tar.gz! "
else
if [ [ -f $HOME /$script -$shorttag .tar.gz ] ] ; then
if ! tar -xf " $HOME / $script - $shorttag .tar.gz " ; then
echo -e " ${ Error } ERROR ${ Off } Failed to extract $script - $shorttag .tar.gz! "
if [ [ -f /tmp/$script -$shorttag .tar.gz ] ] ; then
# Extract tar file to /tmp/<script-name>
if ! tar -xf " /tmp/ $script - $shorttag .tar.gz " -C "/tmp" ; then
echo -e " ${ Error } ERROR ${ Off } Failed to " \
" extract $script - $shorttag .tar.gz! "
else
if ! rm " $HOME / $script - $shorttag .tar.gz " ; then
echo -e " ${ Error } ERROR ${ Off } Failed to delete downloaded $script - $shorttag .tar.gz! "
# Copy new script sh files to script location
if ! cp -p " /tmp/ $script - $shorttag / " *.sh " $scriptpath " ; then
copyerr = 1
echo -e " ${ Error } ERROR ${ Off } Failed to copy " \
" $script - $shorttag .sh file(s) to:\n $scriptpath "
else
echo -e " \n $tag and changes.txt are in ${ Cyan } $shorthome / $script - $shorttag ${ Off } "
echo -e " ${ Cyan } Do you want to stop this script so you can run the new one? ${ Off } {y/n] "
read -r -t 30 reply
# Set permsissions on CHANGES.txt
if ! chmod 744 " $scriptpath / " *.sh ; then
permerr = 1
echo -e " ${ Error } ERROR ${ Off } Failed to set permissions on: "
echo " $scriptpath *.sh file(s) "
fi
fi
# Copy new CHANGES.txt file to script location
if ! cp -p " /tmp/ $script - $shorttag /CHANGES.txt " " $scriptpath " ; then
copyerr = 1
echo -e " ${ Error } ERROR ${ Off } Failed to copy " \
" $script - $shorttag /CHANGES.txt to:\n $scriptpath "
else
# Set permsissions on CHANGES.txt
if ! chmod 744 " $scriptpath /CHANGES.txt " ; then
permerr = 1
echo -e " ${ Error } ERROR ${ Off } Failed to set permissions on: "
echo " $scriptpath /CHANGES.txt "
fi
fi
# Delete downloaded .tar.gz file
if ! rm " /tmp/ $script - $shorttag .tar.gz " ; then
delerr = 1
echo -e " ${ Error } ERROR ${ Off } Failed to delete " \
" downloaded /tmp/ $script - $shorttag .tar.gz! "
fi
# Delete extracted tmp files
if ! rm -r " /tmp/ $script - $shorttag " ; then
delerr = 1
echo -e " ${ Error } ERROR ${ Off } Failed to delete " \
" downloaded /tmp/ $script - $shorttag ! "
fi
# Notify of success (if there were no errors)
if [ [ $copyerr != 1 ] ] && [ [ $permerr != 1 ] ] ; then
echo -e " \n $tag and changes.txt downloaded to: " \
" $scriptpath "
echo -e " ${ Cyan } Do you want to stop this script " \
" so you can run the new one? ${ Off } [y/n] "
read -r reply
if [ [ ${ reply ,, } = = "y" ] ] ; then exit; fi
fi
fi
else
echo -e " ${ Error } ERROR ${ Off } $shorthome / $script - $shorttag .tar.gz not found! "
#ls $HOME/ | grep "$script" # debug
echo -e " ${ Error } ERROR ${ Off } " \
" /tmp/ $script - $shorttag .tar.gz not found! "
#ls /tmp | grep "$script" # debug
fi
fi
else
echo -e " ${ Error } ERROR ${ Off } Failed to cd to /tmp! "
fi
fi
fi
fi
@ -288,12 +417,29 @@ fixdrivemodel(){
if [ [ $1 = ~ MZ.*" 00Y" ] ] ; then
hdmodel = $( printf "%s" " $1 " | sed 's/ 00Y.*//' )
fi
# Brands that return "BRAND <model>" and need "BRAND " removed.
if [ [ $1 = ~ ^[ A-Za-z] { 1,7} " " .* ] ] ; then
#see Smartmontools database in /var/lib/smartmontools/drivedb.db
hdmodel = ${ hdmodel # "WDC " } # Remove "WDC " from start of model name
hdmodel = ${ hdmodel # "HGST " } # Remove "HGST " from start of model name
hdmodel = ${ hdmodel # "TOSHIBA " } # Remove "TOSHIBA " from start of model name
# Old drive brands
hdmodel = ${ hdmodel # "Hitachi " } # Remove "Hitachi " from start of model name
hdmodel = ${ hdmodel # "SAMSUNG " } # Remove "SAMSUNG " from start of model name
hdmodel = ${ hdmodel # "FUJISTU " } # Remove "FUJISTU " from start of model name
hdmodel = ${ hdmodel # "APPLE HDD " } # Remove "APPLE HDD " from start of model name
fi
}
getdriveinfo( ) {
# Skip removable drives (USB drives)
removable = $( cat " $1 /removable " )
if [ [ $removable = = "0" ] ] ; then
# $1 is /sys/block/sata1 etc
# Skip USB drives
usb = $( grep $( basename -- " $1 " ) /proc/mounts | grep usb | cut -d" " -f1-2)
if [ [ ! $usb ] ] ; then
# Get drive model and firmware version
hdmodel = $( cat " $1 /device/model " )
hdmodel = $( printf "%s" " $hdmodel " | xargs) # trim leading and trailing white space
@ -311,6 +457,7 @@ getdriveinfo() {
}
getm2info( ) {
# $1 is /sys/block/nvme0n1 etc
nvmemodel = $( cat " $1 /device/model " )
nvmemodel = $( printf "%s" " $nvmemodel " | xargs) # trim leading and trailing white space
if [ [ $2 = = "nvme" ] ] ; then
@ -327,6 +474,7 @@ getm2info() {
getcardmodel( ) {
# Get M.2 card model (if M.2 drives found)
# $1 is /dev/nvme0n1 etc
if [ [ ${# nvmelist [@] } -gt "0" ] ] ; then
cardmodel = $( synodisk --m2-card-model-get " $1 " )
if [ [ $cardmodel = ~ M2D[ 0-9] [ 0-9] ] ] ; then
@ -343,6 +491,7 @@ getcardmodel() {
for d in /sys/block/*; do
# $d is /sys/block/sata1 etc
case " $( basename -- " ${ d } " ) " in
sd*| hd*)
if [ [ $d = ~ [ hs] d[ a-z] [ a-z] ?$ ] ] ; then
@ -361,7 +510,10 @@ for d in /sys/block/*; do
if [ [ $m2 != "no" ] ] ; then
getm2info " $d " "nvme"
# Get M.2 card model if in M.2 card
getcardmodel " /dev/ $d "
getcardmodel " /dev/ $( basename -- " ${ d } " ) "
# Enable creating M.2 storage pool and volume in Storage Manager
echo 1 > /run/synostorage/disks/$( basename -- " $d " ) /m2_pool_support
fi
fi
; ;
@ -371,7 +523,10 @@ for d in /sys/block/*; do
if [ [ $m2 != "no" ] ] ; then
getm2info " $d " "nvc"
# Get M.2 card model if in M.2 card
getcardmodel " /dev/ $d "
getcardmodel " /dev/ $( basename -- " ${ d } " ) "
# Enable creating M.2 storage pool and volume in Storage Manager
echo 1 > /run/synostorage/disks/$( basename -- " $d " ) /m2_pool_support
fi
fi
; ;
@ -388,9 +543,9 @@ fi
# Check hdds array isn't empty
if [ [ ${# hdds [@] } -eq "0" ] ] ; then
echo -e " ${ Error } ERROR ${ Off } No drives found! " && exit 2
echo -e " \n ${ Error } ERROR ${ Off } No drives found! " && exit 2
else
echo " HDD/SSD models found: ${# hdds [@] } "
echo -e " \n HDD/SSD models found: ${# hdds [@] } "
num = "0"
while [ [ $num -lt " ${# hdds [@] } " ] ] ; do
echo " ${ hdds [num] } "
@ -441,7 +596,10 @@ if [[ ${#m2cardlist[@]} -gt "0" ]]; then
fi
# Check m2cards array isn't empty
if [ [ ${# m2cards [@] } -gt "0" ] ] ; then
if [ [ $m2 != "no" ] ] ; then
if [ [ ${# m2cards [@] } -eq "0" ] ] ; then
echo -e "No M.2 cards found\n"
else
echo " M.2 card models found: ${# m2cards [@] } "
num = "0"
while [ [ $num -lt " ${# m2cards [@] } " ] ] ; do
@ -449,6 +607,7 @@ if [[ ${#m2cards[@]} -gt "0" ]]; then
num = $(( num + 1 ))
done
echo
fi
fi
@ -536,6 +695,48 @@ backupdb "$db1" || exit 5
#------------------------------------------------------------------------------
# Edit db files
editcount( ) {
# Count drives added to host db files
if [ [ $1 = = " $db1 " ] ] ; then
db1Edits = $(( db1Edits + 1 ))
elif [ [ $1 = = " $db2 " ] ] ; then
db2Edits = $(( db2Edits + 1 ))
fi
}
editdb7( ) {
if [ [ $1 = = "append" ] ] ; then # model not in db file
if sed -i " s/}}}/}},\" $hdmodel \":{ $fwstrng $default / " " $2 " ; then # append
echo -e " Added ${ Yellow } $hdmodel ${ Off } to ${ Cyan } $( basename -- " $2 " ) ${ Off } "
editcount " $2 "
else
echo -e " \n ${ Error } ERROR 6a ${ Off } Failed to update $( basename -- " $2 " ) ${ Off } "
#exit 6
fi
elif [ [ $1 = = "insert" ] ] ; then # model and default exists
if sed -i " s/\" $hdmodel \":{/\" $hdmodel \":{ $fwstrng / " " $2 " ; then # insert firmware
echo -e " Updated ${ Yellow } $hdmodel ${ Off } to ${ Cyan } $( basename -- " $2 " ) ${ Off } "
#editcount "$2"
else
echo -e " \n ${ Error } ERROR 6b ${ Off } Failed to update $( basename -- " $2 " ) ${ Off } "
#exit 6
fi
elif [ [ $1 = = "empty" ] ] ; then # db file only contains {}
if sed -i " s/{}/{\" $hdmodel \":{ $fwstrng ${ default } }/ " " $2 " ; then # empty
echo -e " Added ${ Yellow } $hdmodel ${ Off } to ${ Cyan } $( basename -- " $2 " ) ${ Off } "
editcount " $2 "
else
echo -e " \n ${ Error } ERROR 6c ${ Off } Failed to update $( basename -- " $2 " ) ${ Off } "
#exit 6
fi
fi
}
updatedb( ) {
hdmodel = $( printf "%s" " $1 " | cut -d"," -f 1)
fwrev = $( printf "%s" " $1 " | cut -d"," -f 2)
@ -545,13 +746,13 @@ updatedb() {
#echo hdmodel "$hdmodel" >&2 # debug
#echo fwrev "$fwrev" >&2 # debug
if grep " $hdmodel " " $2 " >/dev/null; then
if grep " $hdmodel " '":{"' " $fwrev " " $2 " >/dev/null; then
echo -e " ${ Yellow } $hdmodel ${ Off } already exists in ${ Cyan } $( basename -- " $2 " ) ${ Off } " >& 2
else
# Check if db file is new or old style
getdbtype " $2 "
if [ [ $dbtype -gt "6" ] ] ; then
if [ [ $dbtype -gt "6" ] ] ; then
# Don't need to add firmware version?
fwstrng = \" $fwrev \"
fwstrng = " $fwstrng " :{ \" compatibility_interval\" :[ { \" compatibility\" :\" support\" ,\" not_yet_rolling_status\"
@ -561,22 +762,23 @@ updatedb() {
default = " $default " :{ \" compatibility_interval\" :[ { \" compatibility\" :\" support\" ,\" not_yet_rolling_status\"
default = " $default " :\" support\" ,\" fw_dsm_update_status_notify\" :false,\" barebone_installable\" :true} ] } } }
#if sed -i "s/}}}/}},\"$hdmodel\":{$fwstrng$default/" "$2"; then # Don't need to add firmware version?
if sed -i " s/}}}/}},\" $hdmodel \":{ $default / " " $2 " ; then
echo -e " Added ${ Yellow } $hdmodel ${ Off } to ${ Cyan } $( basename -- " $2 " ) ${ Off } "
if grep '"disk_compatbility_info":{}' " $2 " >/dev/null; then
# Replace "disk_compatbility_info":{} with "disk_compatbility_info":{"WD40PURX-64GVNY0":{"80.00A80":{ ... }}},"default":{ ... }}}}
echo "Edit empty db file"
editdb7 "empty" " $2 "
# Count drives added to host db files
if [ [ $2 = = " $db1 " ] ] ; then
db1Edits = $(( db1Edits + 1 ))
elif [ [ $2 = = " $db2 " ] ] ; then
db2Edits = $(( db2Edits + 1 ))
fi
elif grep '"' " $hdmodel " '":' " $2 " >/dev/null; then
# Replace "WD40PURX-64GVNY0":{ with "WD40PURX-64GVNY0":{"80.00A80":{ ... }}},
echo "Insert firmware version"
editdb7 "insert" " $2 "
else
echo -e " \n ${ Error } ERROR 6 ${ Off } Failed to update v7 $( basename -- " $2 " ) ${ Off } "
exit 6
# Add "WD40PURX-64GVNY0":{"80.00A80":{ ... }}},"default":{ ... }}}
echo "Append drive and firmware"
editdb7 "append" " $2 "
fi
elif [ [ $dbtype -eq "6" ] ] ; then
elif [ [ $dbtype -eq "6" ] ] ; then
# example:
# {"model":"WD60EFRX-68MYMN1","firmware":"82.00A82","rec_intvl":[1]},
# Don't need to add firmware version?
@ -622,7 +824,7 @@ while [[ $num -lt "${#hdds[@]}" ]]; do
num2 = "0"
while [ [ $num2 -lt " ${# eunits [@] } " ] ] ; do
eudb = " ${ dbpath } ${ eunits [ $num2 ],, } ${ version } .db "
if [ [ -f " $eudb " ] ] ; then
if [ [ -f " $eudb " ] ] ; then
backupdb " $eudb " && \
updatedb " ${ hdds [ $num ] } " " $eudb "
else
@ -647,7 +849,7 @@ while [[ $num -lt "${#nvmes[@]}" ]]; do
# M.2 adaptor cards
num2 = "0"
while [ [ $num2 -lt " ${# m2carddbs [@] } " ] ] ; do
if [ [ -f " ${ dbpath } ${ m2carddbs [ $num2 ] } " ] ] ; then
if [ [ -f " ${ dbpath } ${ m2carddbs [ $num2 ] } " ] ] ; then
backupdb " ${ dbpath } ${ m2carddbs [ $num2 ] } " && \
updatedb " ${ nvmes [ $num ] } " " ${ dbpath } ${ m2carddbs [ $num2 ] } "
else
@ -673,7 +875,8 @@ setting="$(get_key_value $synoinfo $sdc)"
if [ [ $force = = "yes" ] ] ; then
if [ [ $setting = = "yes" ] ] ; then
# Disable support_disk_compatibility
sed -i " s/ ${ sdc } =\"yes\"/ ${ sdc } =\"no\"/ " " $synoinfo "
#sed -i "s/${sdc}=\"yes\"/${sdc}=\"no\"/" "$synoinfo"
synosetkeyvalue " $synoinfo " " $sdc " "no"
setting = " $( get_key_value " $synoinfo " $sdc ) "
if [ [ $setting = = "no" ] ] ; then
echo -e "\nDisabled support disk compatibility."
@ -682,7 +885,8 @@ if [[ $force == "yes" ]]; then
else
if [ [ $setting = = "no" ] ] ; then
# Enable support_disk_compatibility
sed -i " s/ ${ sdc } =\"no\"/ ${ sdc } =\"yes\"/ " " $synoinfo "
#sed -i "s/${sdc}=\"no\"/${sdc}=\"yes\"/" "$synoinfo"
synosetkeyvalue " $synoinfo " " $sdc " "yes"
setting = " $( get_key_value " $synoinfo " $sdc ) "
if [ [ $setting = = "yes" ] ] ; then
echo -e "\nRe-enabled support disk compatibility."
@ -697,7 +901,8 @@ setting="$(get_key_value $synoinfo $smc)"
if [ [ $ram = = "yes" ] ] ; then
if [ [ $setting = = "yes" ] ] ; then
# Disable support_memory_compatibility
sed -i " s/ ${ smc } =\"yes\"/ ${ smc } =\"no\"/ " " $synoinfo "
#sed -i "s/${smc}=\"yes\"/${smc}=\"no\"/" "$synoinfo"
synosetkeyvalue " $synoinfo " " $smc " "no"
setting = " $( get_key_value " $synoinfo " $smc ) "
if [ [ $setting = = "no" ] ] ; then
echo -e "\nDisabled support memory compatibility."
@ -706,7 +911,8 @@ if [[ $ram == "yes" ]]; then
else
if [ [ $setting = = "no" ] ] ; then
# Enable support_memory_compatibility
sed -i " s/ ${ smc } =\"no\"/ ${ smc } =\"yes\"/ " " $synoinfo "
#sed -i "s/${smc}=\"no\"/${smc}=\"yes\"/" "$synoinfo"
synosetkeyvalue " $synoinfo " " $smc " "yes"
setting = " $( get_key_value " $synoinfo " $smc ) "
if [ [ $setting = = "yes" ] ] ; then
echo -e "\nRe-enabled support memory compatibility."
@ -714,6 +920,38 @@ else
fi
fi
# Optioanlly set mem_max_mb to the amount of installed memory
if [ [ $ram = = "yes" ] ] ; then
# Get total amount of installed memory
IFS = $'\n' read -r -d '' -a array < <( dmidecode -t memory | grep -i 'size' )
if [ [ ${# array [@] } -gt "0" ] ] ; then
num = "0"
while [ [ $num -lt " ${# array [@] } " ] ] ; do
ramsize = $( printf %s " ${ array [num] } " | cut -d" " -f2)
if [ [ $ramtotal ] ] ; then
ramtotal = $(( ramtotal + ramsize))
else
ramtotal = " $ramsize "
fi
num = $(( num + 1 ))
done
fi
# Set mem_max_mb to the amount of installed memory
setting = " $( get_key_value $synoinfo mem_max_mb) "
if [ [ $ramtotal -gt $setting ] ] ; then
synosetkeyvalue " $synoinfo " mem_max_mb " $ramtotal "
# Check we changed mem_max_mb
setting = " $( get_key_value $synoinfo mem_max_mb) "
if [ [ $setting = = " $ramtotal " ] ] ; then
echo -e " \nSet max memory to $ramtotal MB. "
else
echo -e " \n ${ Error } ERROR ${ Off } Failed to change max memory! "
fi
elif [ [ $setting = = " $ramtotal " ] ] ; then
echo -e " \nMax memory already set to $ramtotal MB. "
fi
fi
# Enable m2 volume support
if [ [ $m2 != "no" ] ] ; then
@ -723,12 +961,13 @@ if [[ $m2 != "no" ]]; then
setting = " $( get_key_value $synoinfo ${ smp } ) "
enabled = ""
if [ [ ! $setting ] ] ; then
# Add support_m2_pool"yes"
# Add support_m2_pool= "yes"
echo 'support_m2_pool="yes"' >> " $synoinfo "
enabled = "yes"
elif [ [ $setting = = "no" ] ] ; then
# Change support_m2_pool"no" to "yes"
sed -i " s/ ${ smp } =\"no\"/ ${ smp } =\"yes\"/ " " $synoinfo "
# Change support_m2_pool="no" to "yes"
#sed -i "s/${smp}=\"no\"/${smp}=\"yes\"/" "$synoinfo"
synosetkeyvalue " $synoinfo " " $smp " "yes"
enabled = "yes"
elif [ [ $setting = = "yes" ] ] ; then
echo -e "\nM.2 volume support already enabled."
@ -758,7 +997,8 @@ if [[ $nodbupdate == "yes" ]]; then
disabled = "yes"
elif [ [ $url != "127.0.0.1" ] ] ; then
# Edit drive_db_test_url=
sed -i "s/drive_db_test_url=.*/drive_db_test_url=\"127.0.0.1\"/" " $synoinfo " >/dev/null
#sed -i "s/drive_db_test_url=.*/drive_db_test_url=\"127.0.0.1\"/" "$synoinfo" >/dev/null
synosetkeyvalue " $synoinfo " " $dtu " "127.0.0.1"
disabled = "yes"
fi
@ -770,18 +1010,23 @@ if [[ $nodbupdate == "yes" ]]; then
else
echo -e " \n ${ Error } ERROR ${ Off } Failed to disable drive db auto updates! "
fi
else
echo -e "\nDrive db auto updates already disabled."
fi
else
# Re-enable drive db updates
if [ [ $url = = "127.0.0.1" ] ] ; then
# Edit drive_db_test_url=
sed -z "s/drive_db_test_url=\"127\.0\.0\.1\"\n//" " $synoinfo " >/dev/null
#sed -i "s/drive_db_test_url=\"127\.0\.0\.1\"//" "$synoinfo" # works but leaves line feed
#if [[ $url == "127.0.0.1" ]]; then
if [ [ $url ] ] ; then
# Delete "drive_db_test_url=127.0.0.1" line (inc. line break)
#sed -i "/drive_db_test_url=\"127.0.0.1\"/d" "/etc.defaults/synoinfo.conf"
sed -i "/drive_db_test_url=*/d" "/etc.defaults/synoinfo.conf"
# Check if we re-enabled drive db auto updates
url = " $( get_key_value $synoinfo drive_db_test_url) "
if [ [ $url != "127.0.0.1" ] ] ; then
echo -e "\nRe-enabled drive db auto updates."
else
echo -e " \n ${ Error } ERROR ${ Off } Failed to enable drive db auto updates! "
fi
else
echo -e "\nDrive db auto updates already enabled."
@ -795,41 +1040,52 @@ fi
# Show the changes
if [ [ ${ showedits ,, } = = "yes" ] ] ; then
getdbtype " $db1 "
if [ [ $dbtype -gt "6" ] ] ; then
# Show last 12 lines per drive + 4
lines = $(( ( db1Edits * 12 ) + 4 ))
if [ [ $db1Edits -gt "0" ] ] ; then
echo -e " \nChanges to ${ Cyan } $( basename -- " $db1 " ) ${ Off } "
jq . " $db1 " | tail -n " $lines "
elif [ [ $db2Edits -gt "0" ] ] ; then
echo -e " \nChanges to ${ Cyan } $( basename -- " $db2 " ) ${ Off } "
jq . " $db2 " | tail -n " $lines "
fi
elif [ [ $dbtype -eq "6" ] ] ; then
# Show first 8 lines per drive + 2
lines = $(( ( db1Edits * 8 ) + 2 ))
if [ [ $db1Edits -gt "0" ] ] ; then
echo -e " \nChanges to ${ Cyan } $( basename -- " $db1 " ) ${ Off } "
jq . " $db1 " | head -n " $lines "
elif [ [ $db2Edits -gt "0" ] ] ; then
echo -e " \nChanges to ${ Cyan } $( basename -- " $db2 " ) ${ Off } "
jq . " $db2 " | head -n " $lines "
if [ [ $dbtype -gt "6" ] ] ; then
# Show 11 lines after hdmodel line
lines = 11
elif [ [ $dbtype -eq "6" ] ] ; then
# Show 2 lines after hdmodel line
lines = 2
fi
# HDDs/SSDs
if [ [ ${# hdds [@] } -gt "0" ] ] ; then
num = "0"
while [ [ $num -lt " ${# hdds [@] } " ] ] ; do
hdmodel = $( printf "%s" " ${ hdds [ $num ] } " | cut -d"," -f 1)
echo
jq . " $db1 " | grep -A " $lines " " $hdmodel "
num = $(( num + 1 ))
done
fi
# NVMe drives
if [ [ ${# nvmes [@] } -gt "0" ] ] ; then
num = "0"
while [ [ $num -lt " ${# nvmes [@] } " ] ] ; do
nvmemodel = $( printf "%s" " ${ nvmes [ $num ] } " | cut -d"," -f 1)
echo
jq . " $db1 " | grep -A " $lines " " $nvmemodel "
num = $(( num + 1 ))
done
fi
fi
# Make Synology check disk compatibility
/usr/syno/sbin/synostgdisk --check-all-disks-compatibility
status = $?
if [ [ $status -eq "0" ] ] ; then
if [ [ -f /usr/syno/sbin/synostgdisk ] ] ; then # DSM 6.2.3 does not have synostgdisk
/usr/syno/sbin/synostgdisk --check-all-disks-compatibility
status = $?
if [ [ $status -eq "0" ] ] ; then
echo -e "\nDSM successfully checked disk compatibility."
else
# Ignore DSM 6 as it returns 255 for "synostgdisk --check-all-disks-compatibility"
else
# Ignore DSM 6.2.4 as it returns 255 for "synostgdisk --check-all-disks-compatibility"
if [ [ $dsm -gt "6" ] ] ; then
echo -e " \nDSM ${ Red } failed ${ Off } to check disk compatibility with exit code $status "
echo -e " \nYou may need to ${ Cyan } reboot the Synology ${ Off } to see the changes. "
fi
fi
fi
if [ [ $dsm -eq "6" ] ] ; then
007revad
3 years ago
