Clarify DSM installation steps for 2025+ models

Updated the steps for installing DSM on 2025 or later models to clarify telnet connection instructions.

2025_plus_models.md

@@ -26,20 +26,22 @@ ### Setting up a new 2025 or later plus model with only unverified HDDs
 
 1. Start telnet by entering `http://<NAS-IP>:5000/webman/start_telnet.cgi` into your browser's address bar.
     - Replace `<NAS-IP>` with the IP address of the Synology NAS. 
-3. Open a telnet client on your computer and log in to telnet with:
-    - `root` for the username
+2. Open a telnet client (powershell, PuTTY etc) on your computer and connect to the Synology with 'telnet <NAS-IP>`.
+    - Replace `<NAS-IP>` with the IP address of the Synology NAS. 
+3. Log into telnet with:
+    - `root` for the login
     - `101-0101` for the password
-5. Execute the following command: (using a while loop in case DSM is running in a VM)
+4. Execute the following command: (using a while loop in case DSM is running in a VM)
     ```
     while true; do touch /tmp/installable_check_pass; sleep 1; done
     ```
-7. Refresh the web installation page and install DSM.
-8. Then in the telnet window, or via SSH, execute the following command:
+5. Refresh the web installation page and install DSM.
+6. Then in the telnet window, or via SSH, execute the following command:
    ```
    /usr/syno/bin/synosetkeyvalue /etc.defaults/synoinfo.conf support_disk_compatibility no
    ```
-9.  If Storage Manager is already open close then open it, or refresh the web page. If refreshing the page or restarting Storage Manager is not working, try restarting your Synology NAS.
-10. You can now create your storage pool from Storage Manager.
+7.  If Storage Manager is already open close then open it, or refresh the web page. If refreshing the page or restarting Storage Manager is not working, try restarting your Synology NAS.
+8. You can now create your storage pool from Storage Manager.
 
 <br>