@ -27,12 +27,36 @@
#
# Maybe also edit the other disk compatibility db in synoboot, used during boot time.
# It's also parsed and checked and probably in some cases it could be more critical to patch that one instead.
#
# Solve issue of --restore option restoring files that were backed up with older DSM version.
# DONE
#
# Added "You may need to reboot" message when NVMe drives were detected.
#
# Fixed HDD/SSD firmware versions always being 4 characters long (for DSM 7.2 and 6.2.4 Update 7).
#
# Fixed detecting amount of installed memory (for DSM 7.2 which now reports GB instead of MB).
#
# Fixed USB drives sometimes being detected as internal drives (for DSM 7.2).
#
# Fixed error if /run/synostorage/disks/nvme0n1/m2_pool_support doesn't exist yet (for DSM 7.2).
#
# Fixed drive db update still being disabled in /etc/synoinfo.conf after script run without -n or --noupdate option.
#
# Fixed drive db update still being disabled in /etc/synoinfo.conf after script run with --restore option.
#
# Fixed permissions on restored files being incorrect after script run with --restore option.
#
# Fixed permissions on backup files.
#
# Now skips checking the amount of installed memory in DSM 6 (because it was never working).
#
# Now the script reloads itself after updating.
#
# Added --autoupdate option to auto update synology_hdd_db x days after new version released.
# Added --autoupdate=AGE option to auto update synology_hdd_db x days after new version released.
# Autoupdate logs update success or errors to DSM system log.
#
# Added -w, --wdda option to disable WDDA
#
#
@ -154,7 +178,7 @@
# Optionally disable "support_disk_compatibility".
scriptver = "v2.3.48 "
scriptver = "v2.3.49 "
script = Synology_HDD_db
repo = "007revad/Synology_HDD_db"
@ -194,12 +218,12 @@ Options:
-n, --noupdate Prevent DSM updating the compatible drive databases
-m, --m2 Don' t process M.2 drives
-f, --force Force DSM to not check drive compatibility
-r, --ram Disable memory compatibility checking
-r, --ram Disable memory compatibility checking ( DSM 7.x only)
-w, --wdda Disable WD WDDA
--restore Undo all changes made by the script
--autoupdate= [ age] ( useful when script is scheduled)
'age' is how old a release must be in days
auto-updating, and must be a number: 0 or greater
--autoupdate= AGE Auto update script ( useful when script is scheduled)
AGE is how many days old a release must be before
auto-updating. AGE must be a number: 0 or greater
-h, --help Show this help message
-v, --version Show the script version
@ -444,7 +468,7 @@ if ! printf "%s\n%s\n" "$tag" "$scriptver" |
" $script - $shorttag .sh file(s) to:\n $scriptpath "
syslog_set warn " $script failed to copy $tag to script location "
else
# Set perms issions on script sh files
# Set permissions on script sh files
if ! chmod 744 " $scriptpath / " *.sh ; then
permerr = 1
echo -e " ${ Error } ERROR ${ Off } Failed to set permissions on: "
@ -459,7 +483,7 @@ if ! printf "%s\n%s\n" "$tag" "$scriptver" |
echo -e " ${ Error } ERROR ${ Off } Failed to copy " \
" $script - $shorttag /CHANGES.txt to:\n $scriptpath "
else
# Set perms issions on CHANGES.txt
# Set permissions on CHANGES.txt
if ! chmod 744 " $scriptpath /CHANGES.txt " ; then
if [ [ $autoupdate != "yes" ] ] ; then permerr = 1; fi
echo -e " ${ Error } ERROR ${ Off } Failed to set permissions on: "
@ -523,8 +547,9 @@ if [[ $restore == "yes" ]]; then
# Restore synoinfo.conf from backup
if [ [ -f ${ synoinfo } .bak ] ] ; then
if mv " ${ synoinfo } .bak " " ${ synoinfo } " ; then
echo " Restored $( basename -- " $synoinfo " ) "
#if mv "${synoinfo}.bak" "${synoinfo}"; then
if cp -p " ${ synoinfo } .bak " " ${ synoinfo } " ; then
echo -e " Restored $( basename -- " $synoinfo " ) \n "
else
restoreerr = 1
echo -e " ${ Error } ERROR ${ Off } Failed to restore synoinfo.conf!\n "
@ -533,12 +558,13 @@ if [[ $restore == "yes" ]]; then
# Restore .db files from backups
for f in " ${ !dbbakfiles[@] } " ; do
deleteme = " ${ dbbakfiles [f]%.bak } " # Remove .bak
if mv " ${ dbbakfiles [f] } " " $deleteme " ; then
echo " Restored $( basename -- " $deleteme " ) "
replaceme = " ${ dbbakfiles [f]%.bak } " # Remove .bak
#if mv "${dbbakfiles[f]}" "$replaceme"; then
if cp -p " ${ dbbakfiles [f] } " " $replaceme " ; then
echo " Restored $( basename -- " $replaceme " ) "
else
restoreerr = 1
echo -e " ${ Error } ERROR ${ Off } Failed to restore $( basename -- " $delet eme " ) !\n "
echo -e " ${ Error } ERROR ${ Off } Failed to restore $( basename -- " $replac eme " ) !\n "
fi
done
@ -554,6 +580,9 @@ if [[ $restore == "yes" ]]; then
fi
done
# Delete "drive_db_test_url=127.0.0.1" line (inc. line break) from /etc/synoinfo.conf
sed -i "/drive_db_test_url=*/d" /etc/synoinfo.conf
# Update .db files from Synology
syno_disk_db_update --update
@ -572,8 +601,7 @@ fi
# PCIe M.2 cards and connected Expansion Units.
fixdrivemodel( ) {
# Remove " 00Y" from end of Samsung/Lenovo SSDs
# To fix issue #13
# Remove " 00Y" from end of Samsung/Lenovo SSDs # Github issue #13
if [ [ $1 = ~ MZ.*" 00Y" ] ] ; then
hdmodel = $( printf "%s" " $1 " | sed 's/ 00Y.*//' )
fi
@ -597,7 +625,7 @@ getdriveinfo(){
# $1 is /sys/block/sata1 etc
# Skip USB drives
usb = $( grep " $( basename -- " $1 " ) " /proc/mounts | grep usb | cut -d" " -f1-2)
usb = $( grep " $( basename -- " $1 " ) " /proc/mounts | grep "[U u][S s][B b]" | cut -d" " -f1-2)
if [ [ ! $usb ] ] ; then
# Get drive model and firmware version
@ -607,8 +635,12 @@ getdriveinfo(){
# Fix dodgy model numbers
fixdrivemodel " $hdmodel "
fwrev = $( cat " $1 /device/rev " )
fwrev = $( printf "%s" " $fwrev " | xargs) # trim leading and trailing white space
#fwrev=$(cat "$1/device/rev")
#fwrev=$(printf "%s" "$fwrev" | xargs) # trim leading and trailing white space
#fwrev=$(syno_hdd_util --ssd_detect | grep "/dev/$d" | awk '{print $2}') # GitHub issue #86, 87
# Account for SSD drives with spaces in their model name/number
fwrev = $( syno_hdd_util --ssd_detect | grep " /dev/ $d " | awk '{print $(NF-3)}' ) # GitHub issue #86, 87
if [ [ $hdmodel ] ] && [ [ $fwrev ] ] ; then
hdlist += ( " ${ hdmodel } , ${ fwrev } " )
@ -659,6 +691,11 @@ getcardmodel(){
fi
}
m2_pool_support( ) {
if [ [ -f /run/synostorage/disks/" $( basename -- " $1 " ) " /m2_pool_support ] ] ; then # GitHub issue #86, 87
echo 1 > /run/synostorage/disks/" $( basename -- " $1 " ) " /m2_pool_support
fi
}
for d in /sys/block/*; do
# $d is /sys/block/sata1 etc
@ -683,7 +720,9 @@ for d in /sys/block/*; do
getcardmodel " /dev/ $( basename -- " ${ d } " ) "
# Enable creating M.2 storage pool and volume in Storage Manager
echo 1 > /run/synostorage/disks/" $( basename -- " $d " ) " /m2_pool_support
m2_pool_support " $d "
rebootmsg = yes # Show reboot message at end
fi
fi
; ;
@ -695,7 +734,9 @@ for d in /sys/block/*; do
getcardmodel " /dev/ $( basename -- " ${ d } " ) "
# Enable creating M.2 storage pool and volume in Storage Manager
echo 1 > /run/synostorage/disks/" $( basename -- " $d " ) " /m2_pool_support
m2_pool_support " $d "
rebootmsg = yes # Show reboot message at end
fi
fi
; ;
@ -857,15 +898,20 @@ backupdb(){
# Backup database file if needed
if [ [ ! -f " $1 .bak " ] ] ; then
if [ [ $( basename " $1 " ) = = "synoinfo.conf" ] ] ; then
echo "" >& 2
echo "" >& 2 # Formatting for stdout
fi
if cp " $1 " " $1 .bak " ; then
if cp -p " $1 " " $1 .bak " ; then
echo -e " Backed up $( basename -- " ${ 1 } " ) " >& 2
else
echo -e " ${ Error } ERROR 5 ${ Off } Failed to backup $( basename -- " ${ 1 } " ) ! " >& 2
return 1
fi
fi
# Fix permissions if needed
octal = $( stat -c "%a %n" " $1 " | cut -d" " -f1)
if [ [ ! $octal -eq 644 ] ] ; then
chmod 644 " $1 "
fi
return 0
}
@ -1116,29 +1162,42 @@ else
fi
# Optionally set mem_max_mb to the amount of installed memory
if [ [ $ram = = "yes" ] ] ; then
if [ [ $dsm -gt "6" ] ] ; then # DSM 6 as has no /proc/meminfo
if [ [ $ram = = "yes" ] ] ; then
# Get total amount of installed memory
IFS = $'\n' read -r -d '' -a array < <( dmidecode -t memory | grep -i 'size' )
IFS = $'\n' read -r -d '' -a array < <( dmidecode -t memory | grep "[Ss]ize" ) # GitHub issue #86, 87
if [ [ ${# array [@] } -gt "0" ] ] ; then
num = "0"
while [ [ $num -lt " ${# array [@] } " ] ] ; do
ramsize = $( printf %s " ${ array [num] } " | cut -d" " -f2)
#ramsize=$(printf %s "${array[num]}" | cut -d" " -f2)
ramsize = $( printf %s " ${ array [num] } " | awk '{print $2}' ) # GitHub issue #86, 87
bytes = $( printf %s " ${ array [num] } " | awk '{print $3}' ) # GitHub issue #86, 87
if [ [ $ramsize = ~ ^[ 0-9] +$ ] ] ; then # Check $ramsize is numeric # GitHub issue #86, 87
if [ [ $ramtotal ] ] ; then
ramtotal = $(( ramtotal + ramsize))
else
ramtotal = " $ramsize "
fi
else
echo -e " \n ${ Error } ERROR ${ Off } Memory size is not numeric: ' $ramsize ' "
fi
num = $(( num + 1 ))
done
fi
# Set mem_max_mb to the amount of installed memory
setting = " $( get_key_value $synoinfo mem_max_mb) "
if [ [ $ramtotal = ~ ^[ 0-9] +$ ] ] ; then # Check $ramtotal is numeric
if [ [ $bytes = = "GB" ] ] ; then # DSM 7.2 dmidecode returns GB
ramtotal = $(( ramtotal * 1024 )) # Convert to MB
fi
if [ [ $ramtotal -gt $setting ] ] ; then
synosetkeyvalue " $synoinfo " mem_max_mb " $ramtotal "
# Check we changed mem_max_mb
setting = " $( get_key_value $synoinfo mem_max_mb) "
if [ [ $setting = = " $ramtotal " ] ] ; then
echo -e " \nSet max memory to $ramtotal MB. "
#echo -e "\nSet max memory to $ramtotal MB."
ramgb = $(( ramtotal / 1024 ))
echo -e " \nSet max memory to $ramtotal GB. "
else
echo -e " \n ${ Error } ERROR ${ Off } Failed to change max memory! "
fi
@ -1147,6 +1206,10 @@ if [[ $ram == "yes" ]]; then
ramgb = $(( ramtotal / 1024 ))
echo -e " \nMax memory already set to $ramgb GB. "
fi
else
echo -e " \n ${ Error } ERROR ${ Off } Total memory size is not numeric: ' $ramtotal ' "
fi
fi
fi
@ -1216,6 +1279,7 @@ else
if [ [ $url ] ] ; then
# Delete "drive_db_test_url=127.0.0.1" line (inc. line break)
sed -i "/drive_db_test_url=*/d" " $synoinfo "
sed -i "/drive_db_test_url=*/d" /etc/synoinfo.conf
# Check if we re-enabled drive db auto updates
url = " $( get_key_value $synoinfo drive_db_test_url) "
@ -1285,20 +1349,19 @@ if [[ -f /usr/syno/sbin/synostgdisk ]]; then # DSM 6.2.3 does not have synostgd
status = $?
if [ [ $status -eq "0" ] ] ; then
echo -e "\nDSM successfully checked disk compatibility."
echo -e " \nYou may need to ${ Cyan } reboot the Synology ${ Off } to see the changes. "
rebootmsg = yes # Show reboot message at end
else
# Ignore DSM 6.2.4 as it returns 255 for "synostgdisk --check-all-disks-compatibility"
# and DSM 6.2.3 and lower have no synostgdisk command
if [ [ $dsm -gt "6" ] ] ; then
echo -e " \nDSM ${ Red } failed ${ Off } to check disk compatibility with exit code $status "
#if [[ $m2 != "no" ]] && [[ ${#m2cards[@]} -gt "0" ]]; then
echo -e " \nYou may need to ${ Cyan } reboot the Synology ${ Off } to see the changes. "
#fi
rebootmsg = yes # Show reboot message at end
fi
fi
fi
if [ [ $dsm -eq "6" ] ] ; then
# Show reboot message if required
if [ [ $dsm -eq "6" ] ] || [ [ $rebootmsg = = "yes" ] ] ; then
echo -e " \nYou may need to ${ Cyan } reboot the Synology ${ Off } to see the changes. "
fi
Dave Russell
3 years ago
GitHub